This post was last updated September 27, 2011.
*poke poke poke poke poke poke*
Noted and deserved!
Other life responsibilities jumped the line, trying to get myself back to the lab ASAP!
How about an update on how things are going .. we are close to may.. real close hope eveything is ok…
Agree.. POKE poke… anything for update?? on where this stands as were well into 2012
Hopefully more coming soon.. this is a excellent article. Recommended to anyone who wants to learn about cost/performance of compounds.
Impressive work, mate. Most interesting part in your reviews ist the contakt-temperature correlation. Looking forward to the Gelid tests and how the Coollab TIMs will end up on your test bed, especially if contact behaviour will be similar to the Indigo Xtreme – the latter is not available in Germany, only the Liquid Metal TIMs of Coollab, the Nanoxia Nano TF and the Phobya LM.
Liquid Metal TIMs came into play in a discussion about what will be “the best” TIM to buy. One big point for LM is durability. Coollab i.e. stated that LM performance is constant over years, whereas for the the well performing conventional compounds both Prolimatech and Thermalright recommend to reapply every 12 month! 😉
Hi Vapor, I work for TIM Consultants and was hoping you could include Quantum. Will send you samples if you would like them. Thanks,
I’ll include Quantum…kind of forgot about it since you’re not in many shops
No need to send any samples, I’ll pick some up. Won’t be very soon though; I’m set on the TR Chill Factor trio and the three Tuniqs for the next two batches after the Arctic Silver 5/Ceramique/Ceramique 2 trio that’s in progress now. So basically 2 months until Quantum can be tested, probably paired with Noctua NT-H1 and OCZ Freeze.
Sounds great – thank you!
Any idea if IC Diamond and Noctua’s paste are going to make it in? Hoped to see a few more numbers on ICD, even though it’s been tested before here, and didn’t see any about Noctua’s one, so curious about that.
Noctua NT-H1 is on the docket, not sure I can give a prediction on when it will be tested though.
IC Diamond will only be tested after this testbed is ‘retired.’ Due to its severe polishing effect, ICD is not something I can test 15 mounts of and guarantee that the testbed will perform the same after as it did before (it permanently alters the CPU IHS and the block bases). That said, I did briefly test it while pre-testing for this testbed and procedure and I can say it’s really good with Poor Contact but does not improve much as contact improves, making it just an ‘okay’ paste when you have at least moderate contact, which most CPU blocks, most GPU blocks, and most heatsinks do. In the old testing, the Apogee GTZ used makes good contact and ICD just can’t keep up with Shin-Etsu X23-7783D (and wouldn’t keep up with Prolimatech PK-1).
Btw if u got problems on getting shinetsu x23 i got 2 and i can send 1 as donation for the tests! 😀
No need, but thanks for the offer Already have nearly every TIM in house, ensures there’s no testing delays based on availability.
Any plans on adding Shin-Etsu X23-7783D to the mix?
Shin-Etsu X23-7783D, X23-7762, and G751 are all planned as a later batch (when that will be, I don’t know).